Aeini, m. (2016) Measuring the Return Effect of Increasing Energy Efficiency at the Macroeconomic Level (Case Study of Iran), Master's Degree in Energy Economics, Allameh Tabataba'i University, led by Dr. M. Khorsandi, Faculty of Economics [In Persian].
Ahmadi, M., DadashiRoudbari, A. (2016) Tutorial Statistical downscaling daily weather series, Navid Mehr Publications, Tehran [In Persian].
Amraee, F (2015) Analysis of the degrees of heating and cooling days in the Lorestan province, led by Dr. Behrouz Nasri, Master's thesis at Lorestan University, Faculty of Literature and Humanities, Department of Geography [In Persian].
Arman, S.A., Zare, R. (2009) “Energy consumption in different sectors and its relation to economic growth in Iran: causality analysis based on the methodology of Toda and Yamamoto”, Journal of Energy Economics, Vol. 6, No. 21, pp. 67-92 [In Persian].
Artmann, N., Gyalistras, D., Manz, H., & Heiselberg, P. (2008) “Impact of climate warming on passive night cooling potential”, Building Research & Information, 36(2), 111-128.
ASHRAE (2009) “Energy Standard for Buildings except Low-Rise Residential Buildings”, American Society of Heating Refrigeration and Air-Conditioning Engineers, Atlanta, GA.
Belcher, S. E., Hacker, J. N., & Powell, D. S. (2005) “Constructing design weather data for future climates”, Building Services Engineering Research and Technology, 26(1), 49-61.
Biesbroek, G. R., Swart, R. J., Carter, T. R., Cowan, C., Henrichs, T., Mela, H., & Rey, D. (2010) “Europe adapts to climate change: comparing national adaptation strategies”, Global environmental change, 20(3), 440-450.
Bivand R, Brunstad R (2005) “Further explorations of interactions between agricultural policy and regional growth in Western Europe: approaches to nonstationarity in spatial econometrics”, 45th Congress of the European Regional Science Association, Amsterdam 23-27 August, 2005.
Borah, P., Singh, M. K., & Mahapatra, S. (2015) “Estimation of degree-days for different climatic zones of North-East India”, Sustainable Cities and Society, 14, 70-81.
Brunsdon C, Fotheringham AS, Charlton M (1998) “Geographically weighted regression-Modeling spatial non-stationarity” The Statistician 47-3, 431-443.
Büyükalaca, O., Bulut, H., & Yılmaz, T. (2001) “Analysis of variable-base heating and cooling degree-days for Turkey”, Applied Energy, 69(4), 269-283.
Charlton, M., Fotheringham, S., & Brunsdon, C. (2009) “Geographically weighted regression”, White paper. National Centre for Geocomputation. National University of Ireland Maynooth.
Chen, L., Fang, X., & Li, S. (2007) “Impacts of climate warming on heating energy consumption and southern boundaries of severe cold and cold regions in China”, Chinese Science Bulletin, 52(20), 2854-2858.
Cheng-wen, Y., & Jian, Y. (2010, May) “Application of ANN for the prediction of building energy consumption at different climate zones with HDD and CDD” In Future Computer and Communication (ICFCC), 2010 2nd International Conference on (Vol. 3, pp. V3-286). IEEE.
CIBSE (The Chartered Institution of Building Services Engineers). (2006) TM41degree-days: Theory and application. London, UK.
Cox, R. A., Drews, M., Rode, C., & Nielsen, S. B. (2015) “Simple future weather files for estimating heating and cooling demand”, Building and Environment, 83, 104-114.
Crawley, D. B. (2007, September) “Creating weather files for climate change and urbanization impacts analysis” In Building Simulation (pp. 1075-1082). IBPSA Beijing.
De Rosa, M., Bianco, V., Scarpa, F., & Tagliafico, L. A. (2015) “Historical trends and current state of heating and cooling degree days in Italy”, Energy Conversion and Management, 90, 323-335.
De Wilde, P., & Coley, D. (2012) “The implications of a changing climate for buildings”, Building and Environment, 55, 1-7.
Eames, M., Kershaw, T., & Coley, D. (2010) “On the creation of future probabilistic design weather years from UKCP09”, Building Services Engineering Research and Technology, 0143624410379934.
Energy balance sheet 2013 (2015) “Deputy Head of Electricity and Energy Affairs (Office of Planning of Electricity and Energy)”, Iran Energy Utilization Organization (Saba), Tehran, Iran [In Persian].
Fallah Ghalhari, G. A., Dadashi Roudbari, A. A., & Asadi, M. (2016) “Identifying the spatial and temporal distribution characteristics of precipitation in Iran”, Arabian Journal of Geosciences, 9(12), 1-12. doi: 10.1007/s12517-016-2606-4
Farajzadeh, M., Ghavidel rahimi, Y., Sharifi, N. (2016) “Spatial modeling of apple produce with a climatic approach”, journal of spatial Planning (Scientific research quarterly), Vol. 20, Issue 1, pp. 127-148 [In Persian].
Fotheringham, A. S., Charlton, M. E., & Brunsdon, C. (2001) “Spatial variations in school performance: a local analysis using geographically weighted regression”, Geographical and Environmental Modelling, 5(1), 43-66.
Guan, L. (2012) “Energy use, indoor temperature and possible adaptation strategies for air-conditioned office buildings in face of global warming”, Building and Environment, 55, 8-19.
Halimi bardeh zard, d. (1390) “Investigating the Impact of Climate Change on Iran's Electric Energy Consumption”, led by Dr. Manouchehr Fardzadeh ASL, Master's Thesis, Tarbiat Modarres University, Faculty of Literature and Humanities, Department of Geography [In Persian].
Hurvich, C. M., Simonoff, J. S., & Tsai, C. L. (1998) “Smoothing parameter selection in nonparametric regression using an improved Akaike information criterion”, Journal of the Royal Statistical Society: Series B (Statistical Methodology), 60(2), 271-293.
Illian, J., Penttinen, A., Stoyan, H., and Stoyan, D. (2008) “Statistical Analysis and Modelling of Spatial Point Patterns”, John Wiley and Sons, Chichester.
Jalal, S. J., & Bani, R. K. (2016) “Impact of orientation of residential neighborhoods on optimizing sustainable and equitable exposure of insolation—Case study of Sulaimani, Iraq” Energy for Sustainable Development, 31, 170-177.
Jiang, F., Li, X., Wei, B., Hu, R., & Li, Z. (2009) “Observed trends of heating and cooling degree-days in Xinjiang Province, China”, Theoretical and applied climatology, 97(3-4), 349-360.
Jungmeier, G., Dunn, J., Elgowainy, A., Ehrenberger, S., & Widmer, R. (2015) “Estimated Environmental Effects of the Worldwide Electric Vehicle Fleet–A Life Cycle Assessment in Task 19 of the International Energy Agency (IEA) on Hybrid and Electric Vehicles (HEV).”
Kershaw, T., Eames, M., & Coley, D. (2011) “Assessing the risk of climate change for buildings: A comparison between multi-year and probabilistic reference year simulations”, Building and Environment, 46(6), 1303-1308.
LI, Y., HE, R., DU, Y., & LU, H. (2011) “Spatio-temporal Variation Characteristics of Cooling Degree Days and Heating Degree Days in South China” [J]. Tropical Geography, 1, 005.
Masoudian, S.A., Alijani, B., Ebrahimi, R. (2011) “Analysis of the average degree / day required (heating and cooling) in the territory of Iran”, Geographical Research, No. 1, pp. 23-36 [In Persian].
Masoudian, S.A., Ebrahimi, R., Mohammadi M. (2014) “Spatial-temporal zoning of seasonal and annual cooling demand of Iran”, Journal of Geographic Information Science and Technology, Sepehr, Vol. 23, Issue 90, Pages 83-90 [In Persian].
Mennis, J. (2006) “Mapping the results of geographically weighted regression”, The Cartographic Journal, 43(2), 171-179.
Mitchel, A. (2005) The ESRI Guide to GIS analysis, Volume 2: Spartial measurements and statistics. ESRI Guide to GIS analysis.
Modiran, R., Babaian, A., Karimian, M. (2007) “Numerical simulation of precipitation and temperature in southeast of Iran using the RegCM3 climatic model”, Nivar Magazine, Vol. 32, Issue 66 and 67, pp. 25-25 [In Persian].
Moser, S. C., & Ekstrom, J. A. (2010) “A framework to diagnose barriers to climate change adaptation” Proceedings of the National Academy of Sciences, 107(51), 22026-22031.
Nik, V. M., & Kalagasidis, A. S. (2013) “Impact study of the climate change on the energy performance of the building stock in Stockholm considering four climate uncertainties” Building and Environment, 60, 291-304.
Omidvar, K., Ebrahimi, R., Dadashi Roudbari, A., Malek Mirzayi, M. (2016) “Evaluation of Extreme cold temperatures spatio-temporal Iran under the effects of global warming to reduce risks”, Enviromental Hazards Management, Vol.2, Issue 4, pp.423-437 [In Persian].
Omidvar, K., Ebrahimi, R., Mazidi, A. (2016) “The Analysis of the Effect of Global Warming on the Monthly Heating and Cooling Degree-Hours of Iran”, journal of spatial Planning (Scientific research quarterly), Vol.20, No.2, pp 41-62 [In Persian].
Rahchamani, M. (2015) “The Impact of Climate Change on Cooling and Heating Requirements in Khorasan Razavi Province”, led by Dr. Mohammad Baqaeeed, Master's Thesis, Hakim Sabzevari University, Faculty of Geography and Environmental Sciences, Natural Geography Group [In Persian].
Ramchurn, S. D., Vytelingum, P., Rogers, A., & Jennings, N. (2011, May) “Agent-based control for decentralised demand side management in the smart grid”, In The 10th International Conference on Autonomous Agents and Multiagent Systems-Volume 1 (pp. 5-12). International Foundation for Autonomous Agents and Multiagent Systems.
Ramezani, B., Kazemnejad, Z. (2014) “Analysis and climate zoning of the total average demand (heating and cooling) in the territory of Guilan with an emphasis on the consumption of natural gas by the household”, Journal of Planning Human Resourses, Vol. 9, Issue 26, Pages 1-16 [In Persian].
Reichler, T., & Kim, J. (2008) “How well do coupled models simulate today's climate?” Bulletin of the American Meteorological Society, 89(3), 303.
Roeckner E, Brokopf R, Esch M, Giorgetta M, Hagemann S, Kornblueh L, Manzini E, Schlese U Schulzweida U .(2006) “Sensitivity of simulated climate to horizontal and vertical resolution in the ECHAM5 atmosphere model” J Clim 19:3771–3791.
Roshan, G. R., & Grab, S. W. (2012) “Regional climate change scenarios and their impacts on water requirements for wheat production in Iran” Int J Plant Prod, 6(2), 239-266.
Roshan, G. R., Ghanghermeh, A. A., & Attia, S. (2017) “Determining new threshold temperatures for cooling and heating degree day index of different climatic zones of Iran” Renewable Energy, 101, 156-167.
Shamsipour, A. (2014) Climate Modeling Theory and Method, Second Edition, Tehran University Press, 278 pp [In Persian].
Shen, X., & Liu, B. (2016) “Changes in the timing, length and heating degree days of the heating season in central heating zone of China” Scientific Reports, 6.
Spinoni, J., Vogt, J., & Barbosa, P. (2015) “European degree‐day climatologies and trends for the period 1951–2011”, International Journal of Climatology, 35(1), 25-36.
Strachan, M., & Banfill, P. (2012) “Decision support tools in energy-led, non-domestic building refurbishment: towards a generic model for property professionals” Facilities, 30(9/10), 374-395.
Tol, R. S. (2009) “The economic effects of climate change” The Journal of Economic Perspectives, 23(2), 29-51.
Verbai, Z., Lakatos, Á., & Kalmár, F. (2014) “Prediction of energy demand for heating of residential buildings using variable degree day” Energy, 76, 780-787.
Watkins, R., & Levermore, G. J. (2010) “Quantifying the effects of climate change and risk level on peak load design in buildings” Building Services Engineering Research and Technology.
Wheeler, D. C. (2014) “Geographically weighted regression” In Handbook of Regional Science (pp. 1435-1459). Springer Berlin Heidelberg.
The Journal of Spatial Planning and Geomatics